Jump to content

Recommended Posts

  • 4 weeks later...

Thanks, um ... "Barry". :huh:

I've successfully tried this on my own 3IS. Here's the instructions, corrected and revised for A/NZ right-hand-drive models:

1. Place the intermittent wiper rotary switch in one of the following 4 positions:
-P1 - all the way down = 3 flashes
-P2 - 1 up from the bottom = 5 flashes
-P3 - 2 up from the bottom = 7 flashes
-P4 - All the way up = no flashes
2. Ignition OFF, hold the wiper switch in the all the way up (OFF) position, turn ignition ON (engine not running), and continue to hold the wiper switch in the OFF position for 5 seconds or more.
3. Move wiper switch down 1 position and HOLD for 5 seconds or more.
4. Move the wiper switch up to OFF position and hold for 5 seconds or more.
5. Move wiper switch down 1 position and hold for 5 seconds or more.
6. Release the wiper switch. The right turn signal should flash 1 time.
7. Pull the turn signal switch the LEFT lane change position (not the turn signal position) and release. The left turn signal should flash 1-4 times.
8. Turn the ignition OFF and then start the car and test.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




×
×
  • Create New...




Forums


News


Membership