IS 300 Manual Conversion

[yvngkidbuu 0]

Anybody done a manual conversion? In the market for a new car and love the look of the IS 300 but no manual is a bummer. Also looking at a 1j/2j swap into a IS 200 but no sure which route would be cheaper.

[Cam 0]

Will be following this thread for sure, I'm tossing up the same thing in the next 12 months.

 

 

[plankton007 33]

A W58 box will work on the IS300 with modifications. I believe you need a manual tailshaft from the 200 though... don't quote me on that.

There is also a 1jz + R154 manual box package from a jzx100 chaser which should be good for most of the parts to go into a 200/300 chassis.

[ilv1004s 98]

plenty of box options to chose from

though the gearbox prices are not cheap

R154 1.5K - 2K just for the box

W55-w58 1-2K

add clutch and flywheel

but most of all u need to a pedal set from a MT is200 and the clutch fluid resevior as well

[harchel6 0]

any transmission from W55 to W58 would fit the IS300? 

W56 and W57 are easier to source. That is why I'm asking.

Thanks in advance. 

[ilv1004s 98]

as long as the bellhousing is for a JZ itll fit