Jump to content

2nd gen IS250 Coilover removal help

Recommended Posts

Hi guys having abit of trouble removing the oem coilover in my 2nd gen lexus is250. 

I have removed the upper ball joint, the 10mm bolt wire housing connected to the coilover, 17mm nut that hold the lower shock and the 3 14mm nuts holding the coilover in the engine bay. 

Am i missing something else as it seems I need the lower control arm to move down in order for the coilover to slide out. 

Do i need to remove the sway bar link connected to the lower control arm? 

I have attached some pictures of what it currently looks like. 

Appreciate any advice :) 


Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Join The Club

    Lexus Owners' Club Australia is an Independent Lexus Owners Club.
    Join our Australian LOC community. It's FREE!

  • Latest Member Posts

    1. 0

      Speed Camera Alert not working

    2. 0

      New member introduction

    3. 0

      Log Book Service

  • Create New...