swordfish

no, but go to lexls.com and there is a great one, which I used myself. be aware that LHD and RHD models are slightly different in the accessory drive areas, cos have brake masters and steering on op. sides. I found this affected some of the bolts u need to undo differ from the tutorials, like a hidden bolt from passenger side going into the water pump which took me hours to discover. its a big job but saves u heaps in labour.Also follow to the letter the instructions for routing of the plug leads, I ended up destroying several leads by getting them caught up in cam cover bolts.

hey guys has anyone got tips on replacing the cam cover gaskets? have all the parts but looking for any advice b4 I start. I have done timing belt myself if anyone interested. cheers al

07 32685866 ask for ian

am changing belt- there is no mark on it for the crankshaft-new belt has 3 marks and two line up with the cam pulley marks and the third is then at 4 0clock on the L cam pulley, and no mark for the crankshaft. how do i get it installed?

there was a celsior(same as ls 400 except air suspension and velour seats) on ebay couple of weeks ago went for aud $5900 shipped to Aus ex japan.173km on it.

hi guys see my reply to earlier post- harness rebuilt in brisbane by auto electrician who knows his lexus. also does starter motor repair on the car.

hi guys managed to work this one out.Part from lexus is $650..ouch a very good auto electrician in brisbane australia (owns 3 lexus himself) can rebuild the harness for big saving. did mine and now all is sweet again.

hey guys, cannot believe none of you have never had to replace this little expensive harness under the steering wheel. Its called a clockspring or spiral wire and runs your horn, aig bag wiring and cruise control.I have lost all these functions and Lexus in Aus quote $600 for the thing. From US its only about $300 AU shipped, but slightly different part no.Anyone out there had one replaced, or having similar probs??

hi guys the wiring harnness under the drivers air bag, runs your horn, cruise,and air bag warning lights etc. have part no of 84306-50090,can anyone source at the right price?? will the 84306-50070 or 8430-50080 from the USA work? any ideas.

have clockspring wiring harness from USA, part no 84306-50070, Aust part no is 84306-50090.Goes under air bag and runs your horn,air bag light and cruise control.HAS anyone tried to use the USA part. Will it work?