Jump to content

Turbo tezza

Regular Member
  • Posts

    76
  • Joined

  • Last visited

Everything posted by Turbo tezza

  1. I will think very seriously about this. It all depends if i can find $650 in the next month.... :( Car's going on dyno sometime this week.. Corey
  2. Hmmm - i seem to think all these 'super' altezza's are silver metallic ;) There maybe something in this..... :D ..... or maybe the RS200z are slightly higher geared...... :) Corey
  3. Who says you can't hit the speed limit (180 km/h) in 3rd gear? I've done it while out passing an evo 3. Wondered why the car lost power, then looked down and was pulling 180 just on the redline. Altezza's should do 240 km, if specs are anything to go by. Read it on a website somewhere. Had mine up to 216 km/h on the speed meter, which gets rid of speed cut. Corey
  4. Dual vvt-i on the tezza. This means that both the intake and exhaust cams are varible, to opimise air flow thru the valve train. (Varible valve timing with intellegence) Vvtl-i is varible valve timing with lift and intellegence. This has varible timing on the intake ( i think) and the cams have extra lift over about 5500 rpm. I'm not sure how v-tec works :( Corey
  5. Hey guys, Power FC is in now, and wow, wot a difference! Car reacts alot better to small accelerator movements from idle - more pickup. It also sounds awesome when idling now, got the whole "lumpy cam" thing going. I havn't taken it for a decent drive yet, but i know its using alot of fuel with the bigger injectors - no problem with running out of fuel now.. :D I was surprised how well it was tuned, from Japan, to run the car. It even fired up and ran first time after being installed, which was really good. All i need now is some decent petrol to run it on. It's also good to know i don't need the oxygen sensor anymore, so if you know anybody that wants, or needs 1.. give me a call. I also have a manual ECU, a tiptronic auto ECU and a GReddy FCU piggyback computer.. + lots of engine bits. When i get the $$$, it will be going down to Columbus Car Clinic ( in chch) to be tuned properly on their laptop. Its going to cost about $500 for the whole day on the dyno. Corey
  6. Happy birthday Diane. Have a great nite :D Corey
  7. sorry, thats just what i was told by the guys who re-built my engine :( May not be rite. As you say, they probably are just cast, just they look alot different to the pistons that went back into my engine. ( mr-2 turbo pistons) Corey
  8. Hey guys, I received my Apexí Power FC today, along with the hand controller and extension cable for the hand controller. It is going to be installed next Thursday, along with the wiring in the loom being 'tidied up' and the GReddy FCU being removed I have just been having a look at the manual, and it looks like the ignition, vt intake, and vt exhaust are all adjustable independently which should be good for tuning. Got bigger injectors to go in aswell, 440cc should supply enough fuel for 10 psi boost I'll keep you guys updated with how it goes. Corey
  9. From what i can tell from the power fc manual I got today, the injectors are 340cc. Sounds about right. :) Corey
  10. Yea, i'm kinda working thru the same problem at the moment, havn't come up with any solutions tho. Off the topic - Lawrence - my power fc with hand controller and extension cable turned up today :) It's going in next Thursday to be fitted and the loom to be wired "back to standard" and the FCU to be taken out. Then it will be going for tuning. Corey
  11. Yea, i would like to know the definate answer to this question aswell. I have 8 standard fuel injectors for sale because i have just got a set of 440's, which i hope will be big enough ;) All i need to know now, is whether the fuel pump is up to the task Corey
  12. I've been down to night drags once best was 13.7 @176kmph, also ran 14 twice, had alot of trouble with wheel spin 1st and 2nd gear, possible better time with decent tyres and LSD,ran with 18" rims on 280t is an altezza 280T Toms edition with 3s-gte engine, around 280hp, hence the name. No wonder its quicker ;) My car should be that, if not more, when the new computer goes in and gets tuned properly. Corey
  13. Unoffically, with my pivot speed meter, I got a 14.5 standing 400m. That was only the second time trying, so I think its a bit quicker than that. Mite take it out to Ruapuna 1 day and see what I can get ;) Corey
  14. I switched from a wrx aswell :D seems a pretty common thing to do I couldn't get rid of the turbo tho, the only reason i switched... well 1 of the biggest reasons anyway ;) Lots more power with a turbo-charged 1, bout 50 kw. Which is wot most of them need to perform the way they should B) Corey
  15. If you wanted to buy my car, I would sell it. Mite be hard pressed at 27k tho. ( wouldn't be that far away tho) :) Have a look in my garage, and if you are interested, pm me. ;) Corey
  16. Whats the filter type thing, on the fuel rail, for then??? And thanks for the replies guys. We will find this out soon. ;) Corey
  17. Hey guys, I was wondering if anybody knows how much the factory fuel pump flows, or what size it is. Reason is I may have to upgrade.
  18. Happy birthday Aaron :D Have a great day. Cheers Corey
  19. The reason why, Pik, is that that Altezza is pretty tall geared. They are pulling very close to the speed cut (180 km) in 3rd, to get the revs 7000 rpm, where the power is. My next dyno run will be different, no speed cut now. :D Corey
  20. Hi, The manufacturers specs say 164 kw at fly for manual, which is around 210 hp (correct me if i'm wrong) I had my car dyno'd , Altezza turbo, while getting it tuned. It came back with 170 rwkw or 225 rwhp. Works out to be 199 kw (fly) or 266 hp. The guy that did it said there was a 17% driveloss, coz he could only do the power run in 3rd gear (kept hitting speed cut in higher gear). Higher gear = less loss. This car is manual too. Its a pretty good power gain for bolting on a turbo, with exhaust and pod filter. 35kw = 45 hp @ 5psi boost. Squid, is your car manual? Corey
  21. Hey man,if you send a PM to Boothy (Ian Booth) hes the 1 who is making up the Altezza Race/Targa car with a Lexus V8 installed. I'm pretty sure he has got 1. I got the new engine for my car from Ian, so he should have 1 around somewhere :D Corey
  22. Sadly, no. I don't have any of the intake system, just from the throttle body. Corey
×
×
  • Create New...




Forums


News


Membership