Jump to content

looking for a tech guru

Robbo
 Share

Recommended Posts

Robbo Member

Robbo

Posted
Posted

Hi i have just fitted a second hand 2011 IS250 engine was an automatic to my Lexus 2008 IS250 swapped out the wiring harness fitted up the manual gearbox it drives OK but it idles at about 1750 RPM has anyone got any tips.

i have checked for vacuum leaks all good there.

any help would be appreciated thanks Rob.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing



  • Join The Club

    Lexus Owners' Club Australia is an Independent Lexus Owners Club.
    Join our Australian LOC community. It's FREE!

  • Latest Member Posts

    1. 0

      Video: The stage is set for Lexus Melbourne Cup Day

      Lexus Owners Club in Various Lexus Videos
    2. 0

      Best Fuel economy and Fuel Brand on RX500H?

      I got a RX500H and uses Mobil98, which could only get about 10L/100KM on City and about 8.5L/100KM Highway.
      Yun in Lexus RX400h / RX450h / RX500h Club
    3. 0

      Newbee intro, Gotham City

      Hi all, Long-time gen 2 Prius owner, Melbourne-based… just purchased a 2011 RX450H sports luxury last weekend with nearly 300,000km on the clock đŸ˜… Of course, the very next day it threw a P0A80. Sad trombone. Got it up and running for the time being at least. But I digress… Bit more about me - elec eng grad working in telecommunications, also enjoy playing drums and tinkering with stuff. Nice to be here. Rob
      RobRxTx in New Members Introductions
    4. 9

      Driving Light

      Hello Neil, Great to hear from you. With the XBB kit you get the Dongle which plugs into the OBD2 plug, and the Power Unit, which is a Bluetooth relay that goes under the bonnet close to where the Dongle is situated. The kit comes with all the instructions needed. I sourced the 12 volt positive supply direct from the battery, with an inline fuse fitted the next size up to what the driving lights current draw is. Say your lights draw ten amps, then I would fit a fifteen amp fuse to protect the system. By sourcing direct from the battery, you do not get any significant current drop off, as long as your wires are suited to the current draw. I also ran the negative wire to the Power unit from the battery. The wiring was relatively easy but longest part of the exercise. If you have wired in a relay previously, then you will find it an easy task. I will strongly recommend you get and use relay base for the Power unit, it makes it much easier. I hope this helps you out Neil, Regards Peter
      Golden Eye in Lexus NX Club
    5. 0

      looking for a tech guru

      Hi i have just fitted a second hand 2011 IS250 engine was an automatic to my Lexus 2008 IS250 swapped out the wiring harness fitted up the manual gearbox it drives OK but it idles at about 1750 RPM has anyone got any tips. i have checked for vacuum leaks all good there. any help would be appreciated thanks Rob.
      Robbo in Lexus IS250 / Lexus IS250C / Lexus IS350 / Lexus IS350C Club / Lexus IS-F / IS300h
×
×
  • Create New...




Forums

News

Membership