RS200TEZ
-
Posts
6 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
News & Articles
Videos
Posts posted by RS200TEZ
-
-
Whats MIVEC then? :P
-
A UK owner of the 280 Toms Altezza needs some advice...anyone got any links to info on the engine/turbo setup?
Thanks
-
Re: the Cold Air Box.......fitted easily... from start to finish including taking photos it took me 1 1/2 hours...did not even find anything tricky.
Re: S-AFC diagram......thanks for the link but thats for the S-AFC II I have the S-AFC ....anyone else got a wiring diagram for this? or is it the same as the S-AFC II?
Thanks
James
-
Hi all.
Thanks to Matt I now have the Apexi Filter and Aluminium Induction box for my RS200.
I have driven the car with and without the Aluminium Box and I can tell you there is a big difference.
With the Apexi intake alone the upper revs are much better but it loses some low end power and feels really sluggish until 4500rpm....but....with the Induction box you get much more response below 4500rpm and then its smooth right the way to the red line!
Overall it feels quicker, the noise is superb (if you like that sort of thing) and i have done an extra 25 miles on the last tank of fuel!!!! (might not be related).
Anyway I have taken some pictures of the install and will write up very soon for all of you to use if needed.
I now have an Apexi S-AFC to make use of my mods further....but I dont have a wiring diagram! Anyone able to help me??
Thanks
James
-
Hello everyone, I'm a UK Altezza RS200 Tiptronic owner.
I would like to buy an induction kit for my car but it's difficult to find a dealer in the UK.
Would anyone be prepared to help me and send one to the UK for me please? I can pay using Paypal if thats any use?
Also can anyone advise what the part number is for the Brake master Cylinder on this vehicle? My car is the 98 model
thanks
James UK
Will These Alloys Fit My Altezza?
in Lexus IS200 / Lexus IS300 / Toyota Altezza Club
Posted
I am thinking about purchasing some new alloys and have found a good deal on a set, but will they fit?
They are:
7.0jjx17" 5x114.3 with an offset of 38 and a centre bore of 60.1
Thanks