gee38l

Im looking for a diff for a lexus is300 non LSD or LSD.

Thanks

hey there am from the uk, just thought i would show you what i have done with my audio install.

I have an 51reg IS200 an i decided to upgrade the stock system to the following

headunit: alpine cda9887R

Front end: hertz mille2

sub:hertz mille 2500

Processor:audison bit one(tuning in progress)

amp:hertz hp4

rear fill: NONE, 6x9's removed to lett bass in to car

cable: chord carnival silverscreen

dynamat extreme

rca: audison sonus

stock amp removed and harness adapter fitted

http://i1012.photobucket.com/albums/af248/jefweezy/harness.jpg

http://i1012.photobucket.com/albums/af248/jefweezy/alpinecda9887R.jpg

Made copies of my a pillars from fibreglass resin and material incase i mess up

http://i1012.photobucket.com/albums/af248/jefweezy/pillar.jpg

http://i1012.photobucket.com/albums/af248/jefweezy/L1020266.jpg

Once tweeter angle was achieved, the baffle was mounted and smoothed with bondo.

http://i1012.photobucket.com/albums/af248/jefweezy/tweet.jpg

http://i1012.photobucket.com/albums/af248/jefweezy/L1020275.jpg

http://i1012.photobucket.com/albums/af248/jefweezy/L1020278.jpg

http://i1012.photobucket.com/albums/af248/jefweezy/front.jpg

http://i1012.photobucket.com/albums/af248/jefweezy/bitone.jpg

Doors were fully dynamatted and baffles made out of 2 pieces of 12mm mdf bonded and coated together with resin to produce a solid waterproof baffle,which were bolted to the door skins.

http://i1012.photobucket.com/albums/af248/jefweezy/door.jpg

The holes either side of the sub is were i removed the supports to route the cables and rca's, they were replaced later.

http://i1012.photobucket.com/albums/af248/jefweezy/bkseat.jpg

i used the cover off the back seats(below) as a template that would fit between the wheel arches to mount amps and crossovers.

http://i1012.photobucket.com/albums/af248/jefweezy/card.jpg

http://i1012.photobucket.com/albums/af248/jefweezy/L1020282.jpg

http://i1012.photobucket.com/albums/af248/jefweezy/L1020285.jpg

http://i1012.photobucket.com/albums/af248/jefweezy/L1020281.jpg

Wiring will be tidied up later

Thats a pretty nice set up how long did it take you?

Thanks dude, it took about 2 months on and off to complete, a pain in the a$$

Jeez thats a long time well looking at the photos it seem to be worth it :)

Do you have any photos of the complete job?

Also i was thinking of replacing the stock head unit with something that has bluetooth/iphone connectivty where did you get the frame around so you could use a single din head unit?

Hi All,

I have been searching for few hours trying to figure out how to adjust the handbrake in my 01 is300 does anyone know how to do this or have a link to somewhere that does?

Thanks in advance.

Dont worry i figured it out everything is in the service guide.

hey there am from the uk, just thought i would show you what i have done with my audio install.

I have an 51reg IS200 an i decided to upgrade the stock system to the following

headunit: alpine cda9887R

Front end: hertz mille2

sub:hertz mille 2500

Processor:audison bit one(tuning in progress)

amp:hertz hp4

rear fill: NONE, 6x9's removed to lett bass in to car

cable: chord carnival silverscreen

dynamat extreme

rca: audison sonus

stock amp removed and harness adapter fitted

http://i1012.photobucket.com/albums/af248/jefweezy/harness.jpg

http://i1012.photobucket.com/albums/af248/jefweezy/alpinecda9887R.jpg

Made copies of my a pillars from fibreglass resin and material incase i mess up

http://i1012.photobucket.com/albums/af248/jefweezy/pillar.jpg

http://i1012.photobucket.com/albums/af248/jefweezy/L1020266.jpg

Once tweeter angle was achieved, the baffle was mounted and smoothed with bondo.

http://i1012.photobucket.com/albums/af248/jefweezy/tweet.jpg

http://i1012.photobucket.com/albums/af248/jefweezy/L1020275.jpg

http://i1012.photobucket.com/albums/af248/jefweezy/L1020278.jpg

http://i1012.photobucket.com/albums/af248/jefweezy/front.jpg

http://i1012.photobucket.com/albums/af248/jefweezy/bitone.jpg

Doors were fully dynamatted and baffles made out of 2 pieces of 12mm mdf bonded and coated together with resin to produce a solid waterproof baffle,which were bolted to the door skins.

http://i1012.photobucket.com/albums/af248/jefweezy/door.jpg

The holes either side of the sub is were i removed the supports to route the cables and rca's, they were replaced later.

http://i1012.photobucket.com/albums/af248/jefweezy/bkseat.jpg

i used the cover off the back seats(below) as a template that would fit between the wheel arches to mount amps and crossovers.

http://i1012.photobucket.com/albums/af248/jefweezy/card.jpg

http://i1012.photobucket.com/albums/af248/jefweezy/L1020282.jpg

http://i1012.photobucket.com/albums/af248/jefweezy/L1020285.jpg

http://i1012.photobucket.com/albums/af248/jefweezy/L1020281.jpg

Wiring will be tidied up later

Thats a pretty nice set up how long did it take you?

I have to agree that it's a hassle changing the oil filter. I just could not get it off, after an hour of trying I ended up stabbing a long screwdriver through the centre of the filter to get it off. After that the oil filter fell out of my hands and got wedged just below it and yes oil went f%#%^€£ everywhere.

Hi All,

I have been searching for few hours trying to figure out how to adjust the handbrake in my 01 is300 does anyone know how to do this or have a link to somewhere that does?

Thanks in advance.

Thanks for the info.

I just figured out that my entire fuel door and assemble seem to be all bent are these easy to remove?

I am guessing this is what you are after:

http://my.is/forums/f90/tutorial-how-remove-gas-door-326111/

Thanks for the link. Although the guide is useful doesn't really explain how to put it back in which proved very difficult

Thanks for the info.

I just figured out that my entire fuel door and assemble seem to be all bent are these easy to remove?

Hey All,

Today the spring in my fuel door broke and for the past few hours i have been trying to find a replacement.

Does anyone know any good online stores for lexus parts?

I tried google and ebay so far no luck.

Thanks in advance.