mush

Hi

I have done searches of various forums/google and car audio installation/wiring websites and have had no luck getting a wiring diagram for the CD player for my Australian 1999 Lexus GS300

The wiring harness i bought in Australia even does not match the wiring in my car.

So i was after a wiring diagram to make my life alot easier so i can install my Clarion head unit

Does anyone have this available for me.

I would really appreciate it

Thanks in advance

Hi

Do you have the wiring diagram for the stereo installation??

Thanks

Hi all who are interested.

Recently fitted dvd player, quite easy.

Tools needed

Cordless drill, chicken stick (thin plastic stic with wedge on either end), extention bar (for drill), 10mm (same as roof nut pice for drill), wire cuttters, lugs, lug crimper, cloth (for protection.

1. Put park brake on, shift gear selector to L, place cloth trim over center up to bottom ashtray

2. Remove terminals of battery

2. Place chicken stick in between dash sorrounding and ash tray verticaly, first wedge out left side and right top, and then do the same for the bottem of ash tray till you have removed the ash tray.

3. Next step is to remove the top air vent section (with clock and hazard switch). Again verticaly insert the stick bout 3.5 cm from top of vent and wedge out (both left and right side). Again do to the bottem if allready not removed.

4. Remove top air vent. Remove compleatly you will have to remove the plugs. See the button on top of the plugs, you have to push them down firmley with chicken stick and twist stick while pushing down, this should release plug.

5. Now that the ash tray and top air vent components are removed you should see 4 x10mm bolts 2 at the top (behind air vents top) bottom (where ash tray was).

6. Remove these bolts with cordless.

7. The aircon climate and radio are all atteched to a frame withen the 4 bolts, once 4 bolts are removed yjis section can be pulled out. Grab top and bottom and pull.

8. Remove plugs. Now the entire center consell should be bare.

9. The blue plug contains power. Using a test light attach the earth of test light to the thicker brown wire and work out the 2 positive, 1 is constent with ignition off and both are active with ignition on.

Will post rest soon.