babaquazi
-
Posts
26 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
News & Articles
Videos
Posts posted by babaquazi
-
-
hey guys,
Looking at grabbing a fsport air intake for the is250. After reading up on info on the web i've come across hydrolock a couple of times and its got my scared. What are the chances of it happening? The fsport intake uses a modified version of the factory airbox so everything is enclosed so am i right in assuming that everything should be ok ? The car does 6hrs of highway driving/week and sometimes 60% or more of the trip is undertaken through rainy conditions at 110km/hour. Car isn't lowered. Also will this device work by any chance? Furthermore, are there any improvements in fuel economy namely for those who mostly drive on the highway ?
http://www.aemintakes.com/air_bypass_valve.htm
Cheers guys !
-
i went to my local discount store and bought 2 needles which u use to inflate rugby/soccer balls for 99 cents. Once i heard the click, 2 small flathead screwdrivers on either side of the fascia popped it open
-
hey guys,
Looking to upgrade my stock halogen bulbs with a HID xenon kit off ebay, specifically this kit:
http://www.ebay.com.au/itm/260552366719?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
In the item description it said, "*Certain cars may require a relay harness and or canceller(sold separately)." My question is will i need this relay harness/canceller?
Cheers in advance!
Babaquazi
-
yeh it depends coz my car does about 35,000km/yr so i never go by the time suggestion i strictly stick to the Km requirements.
-
23rd September? niiice ours is sometime during november zzzzz
-
-
been pulled over for having my foggies on quite a few times (and im a red p plater aswell)
they always just say to turn em off never been fined for it
also, im thinking of putting a LED strip (one of the thicker/sturdy looking ones) where the fog lights are, in the section where it angles down
heres a pic with the area cirles in red
i saw it on clublexus AGES ago, but i cant find it anymore
and i dont know how i would wire it up either, so im not gonan try, hahaha
but just an idea
wooow nice k2sty1 yeh i'm a red p-plater as well so lemme know how ur LED strip project goes and if u get any attention from the boyz in blue :) ummm also blue LED licence plate lights...a no go ??
-
I've recently changed my
- rear dome
- boot
- front passenger door lights
- mirror open light
with T10 6 SMD white.
I don't know if they will fit, if i remember right there weren't much room for the ones I changed above.
Also, doesn't it seem abit of overkill with 42SMD LEDs?
I'm planning to change my puddle and front dome light this weekend to the same 6 SMD LED White :)
thanks sengu yeh i'm gonna put the 42LED SMD ones just for the parkers coz there's like 20cm of clearance for em LOL
-
-
hey guys,
i was looking at changing some of the lights around the car. I found an item on ebay listed here
I found that the following light types are suitable for the following locations.
Parking light: 168
License plate: 168
Map light: 168
Step/Courtesy light: 175/194
However seeing as the product is a "42 LED SMD T10" they said "These LED bulbs are longer and wider than stock T10 wedge light bulbs, therefore please make sure they will fit before buying." So to the members who have changed their lights around is there sufficient clearance for these LED's? Also in Australia are we allowed to have Blue LED's for our licence plate lights?
Cheers,
Babaquazi :D
-
I'm sure that we all know about the various supercharger kits for the IS250 that are out there. Not many of them can be purchased by us everyday consumers. This post is probably not as relevant as before with the introduction of the IS350 into the Australian market. However, i decided to look into the RGM supercharger kit manufactured by RGM Motorsport Here is the link for the is250 page and the youtube video. I sent him an email asking
"hi, i was looking at ur products particularly the RGM supercharger for the lexus is250. I was wondering whether you could ship it to postcode 2000, located in Sydney, Australia (would it operate in Australia due to differences in altitude and everything?) and what would be the approximate price for all parts required for the conversion including shipping."
Managing Partner Rob Green replied and stated,
"GMotorsport would like to thank you for your interest in RGM performance. RGM thanks you for your request regarding supercharging the LEXUS is250. We are able to supply the kit in export form for R60 000.00 (ZAR South African rand ) this price EXCLUDING the14% tax as it is for export. This will not include the exhaust system(as it will not meet your emission standards). Shipping will be for your account door to door. The approximate size as well as the weight are as follows:
32 x 23x 22cm and the weight is 44Kilograms
DHL will charge approximately R 10 780.00 ZAR.
Here is the file which Managing Partner Rob Green sent to me within his email
I just thought that i'd post it up here so that if anyone is interested in supercharging their is250, they have a starting point :D
-
hey guys, i was looking around on the net and i saw that some guys were applying plastidip to their rims. Has anyone on the forums gone for it and if so would they be able to upload some pics?
Cheers! :D
-
LOL i had an old navman before which asked me to "perform a u-turn when possible" when i was in the harbor tunnel....:/
-
not a big thing but maybe add "X" under "IS250 Gen 1 Late 2005 - 2008"
-
"Prices will be in the $40k area"
kewl so i can get a 3-4 year old IS250 or a brand new one for $40k
...I'M IN :D
-
I've recently bought a well maintained 1997 GS300, and live in the sydney Randwick area, and wondered if anyone can suggest a good lexus mechanic in the Sydney Area. I'd prefer not to take to general lexus dealership.
a specific problem with the car is sticky brakes, which i'd like to get checked out.
thanks in advance
these guys are pretty good.
Payless Matraville
553 Bunnerong Road
Matraville
* Tel: (02) 9311 7022
-
One last question for you to ponder on; If you had $35,000 to spend on a car, and you couldn't get an IS250 - what else would you get?
Toyota Aurion.
Hmmm if you're not too fussed about luxury badges then for $35k you could the top of the Range 08/09 Aurion Presara which is jam packed with features(basically all features of the is250 SL except for radar cruise control). It has a 3.5L V6 which will output 200kW however it will use up slightly more fuel with a combined fuel rating of 9.9L/100km compared to the 250's 9.1L/100km. It also comes standard with a lot more accessories. If your back seats are going to be used, then the Aurion would be worth having a look due to the back seats being roomier- the car itself is also larger as it competes in the large car market with the Commo's/Falcons.
However, the is250 has a more aggressive look, is more fun to drive AND IS RWD. I have driven both cars and i would recommend the is250 :)
...this last comment may start a flame war but if your after power and have got $35k to spend and don't mind the aurion then maybe a TRD Aurion may be worth having a look..sadly it is FWD like the aurion but it does kick out with 241kW @ 6400rpm and max Torque 400Nm @ 4000rpm. Just my opinion tho..
-
Sydney City - 8303 1900
Chatswood - 9410 3288
Parramatta - 1300 797 837
Sutherland - 9542 6167
Parramatta......service direct 9204 6520
Sydney City....service direct 8303 1933
Chatswood......service direct 9406 8388
I think the price you've been quoted ($920) is very competitive....
hmmm i phoned up all the sydney dealers for the 60k service and they all asked for $750~ish and Lexus of Canberra was asking for about $540 so in my opinion i reckon the canberra branch will be cheaper HOWEVER i don't have any idea about the 90k service so yeh i'd probs say to just give em a quick phone call to see whats going on.
-
hey guys,
We recently went to our mechanic to get our tyres changed and he installed a set of LED parkers for free :). Once i asked him about a xenon conversion kit he said that it would cost $350 installed(i can't remember the brand but he said that that he's had no issues with them). I heard that for the hid xenon conversion, the front bumper has to come off. Now the vehicle is still under warranty so will there be any issues? Either with the changing of the lights and/or the bumper coming off.
Cheers,
Babaquazi
-
gonna be doing this maybe next week
black paint with white LEXUS decals
also ordered a sticker from ebay saying
"warning:
smoking only permitted in this vehicle if:
1) you shout the driver a durry
2) ash out the window
3) never use the car ashtray"
should be good for a couple of laughs then i'll take it off, lol
haha that sounds MAAAD bro. Have you got a link?? I wanna get it like now!
-
ooooh that sounds pretty cool. Where can you purchase these LED parkers from?
-
i saw that post before but it didn't answer my question in regards to the dvd player. Can't i insert the V15 map disc into the dvd player without removing the clock fascia?
-
greetings all,
This is my 1st post on the lexus forums. I recently bought an '08 is250 X. Now i have a "V15 maps" which i'd like to install. On my old Aurion presara, it was a simple matter of taking the old disc out of the dvd player, inserting the V15 disc and it was all done :). However, with the lexus, i saw that the clock fascia has to be removed? Would i be able to just insert the V15 disc into the dvd player? Would anyone be able to give me a outline as to what to do? IF anyone would be able to help out this newcomer then they'd get a loud THANKS! :)
Hydrolock ?
in Lexus IS250 / Lexus IS250C / Lexus IS350 / Lexus IS350C Club / Lexus IS-F / IS300h
Posted
thanks mate ! i was looking at lexus of north miami's ebay site and yesterday around (1am1ish) they had the air intake listed for approx. AUS $270 and on their store page they also wrote "free shipping for this weekend for international orders" according to google local time at miami at the moment is Sunday 7.11pm
BUT now the intake is listed at approx $284 and i can't find any info on the free shipping thingo anymore