INASNT

For the rear try get a +40 or +42 offset otherwise with 265's on the back they might stick out of the guards 2 much. Mine with rear +45 9.5 and 265, i cant put the backs to superlow mode coz the tyres will rub the guards

90-00 Lexus LS400 Chrome Trunk Lid Trim. Stick on chrome piece. Note - Will not fit on Celsior as Celsior rear tail lights are longer than LS400 and will foul. Found this out the hard way on my celsior. Trying to get back part of what I paid for it from the states. Can post interstate Price - $100

Forgot to add its a 1996 Series 2 M-Spec and I am open to resonable offers on price

It has come time to sell the R33 which I bought 5 years ago from a local importer as I am building a new house and need $$ for it and have no room to store 3 cars at the new place. Bodykit came with the car and it was mechanically stock when purchased. The car has spent the last few months sitting in the garage as I have another car as a daily driver. General White 88,000 KM On Clock Twin Air Bags Climate Control Full electrics 2 Way Electric Sunroof Prestige Alarm System Engine / Performance Parts Garrett GT30 Ball Bearing Turbo (0.70 A/R Polished Compressor Housing, 0.82 A/R Exhaust Housing) Braided Oil / Water Lines To / From Turbo XTR Exhaust Housing Blanket 45mm Turbosmart External Wastegate With 1 Bar Spring Custom Made Steam Pipe High Mount Turbo Manifold K/N Pod Filter With 3-Inch Polished 304 S/S Intake Pipe R33 GTR Stealth Bov’s 6 x Sard 550cc Side Feed Injectors Bosch 044 600HP Intank Fuel Pump Z32 80mm Air Flow Meter 9 Puck Single Plate Cushioned Ceramic Xtreme Clutch With 1800lbs Pressure Plate 4.8 kg Chrome Molly Super Light Weight Flywheel HKS Adjustable Exhaust Cam Gear HKS 600x300x76 Tube And Fine Intercooler Custom Made 304 S/S 2.5 Inch Mandrel Bent Intercooler Piping Cusco Oil / Air Separator Custom Made 3 Inch Heat Insulated Mandrel Bent Dump Pipe And External Wastegate Adapter Custom Made 3 Inch Mandrel Bent Exhaust From Dump Pipe Back Highflow 3 Inch Cat and Polished 3 inch Rear Magnaflow Muffler With 4inch Tip HKS Ionized Oil Cap C’s Quick Shifter Meridian Motorsport Oil Cooler Suspension/Brakes Blistein Shocks Custom made king springs front and back (300lbs front, 250lbs rear) Front strut bar Rear Stabilizer Bar Whiteline front/rear adjustable swaybars Subframe alignment bushes Whiteline castor/camber kits Hicas Locking Bar Wheel alignment to track specifications DBA GTR 324mm slotted front rotors Ferado DS2500 Pads front Comp 2 rear Mechanical LSD Diff Electronics HKS EVC 3 Electronic Boost Controller Apexi Power FC Programmable ECU Apexi Power FC Hand Controller Pivot Adjustable Shift Light Blitz Turbo Timer Apexi 60mm EL 2 Electric Boost Gauge Apexi 60mm EL 2 Electric Oil Temp Gauge Apexi EL 2 Gauge Controller Trust Dual A Pillar Gauge Holder Interior Custom Painted Electric Blue Interior Highlights Jetspeed EL White Faced Display Dash Kit Trust Chrome Gear Knob Alpine 3 Disk In Dash CD Player Kenwood Front Splits NISMO car mats Custom Made Leather Electric Blue Handbrake & Gear Boots Blue Recaro SR3 Front Seats ERG 5-point harness Exterior Nismo 400R Front Bar With Grill Insert Nismo 400R Side Skirts Nismo 400R Read Bar Stealth Rear Boot Lip 18-Inch White With Polished Lip Starcorp Racing Rims, 8.5 Inch Front, 9.5 Inch Back 235 x 40 Front, 265 x 35 Back Hankook K104 Tyres (80% Thread Left) Clear Side Indicators Tinted 30% Front And Sides, 20% Back Window NISMO Carbon Fiber Pillar Garnish Performance 1 Bar Boost – 260kw@wheels (Racepace Dyno) 1.4 Bar Boost – 312kw@wheels (04’ Autosalon Dyno Comp) Car serviced every 5000km with full synthetic oil. All Mechanical / Electrical work carried out by Ice Performance Have receipts for most parts purchased for the car. Car is setup for the track, throw some semi comps tyres on there and you will do some good times. Price - Looking for 35k ONO Other pics can be emailed on request. Email me at redlem@bigpond.net.au if interested

Data systems ASE 664 suspension height controller for sale brought in for a friend but he has had some financial problems so its up for sale. Suited to a U31 Toyota Soarer GT V8 You can program 3 different setting eg 1 - normal, 2 - Low for cruising, 3 - front higher than normal for going up driveways etc. 16 other individual settings for going higher or lower Front left/right and rear can be adusted to individual settings It also has a speed control setting where u can set the front and rear to different heights depending on the speed of the car. The TEMS still works as the harness this comes with plugs into the air sus computer and then the stock one plugs into the back of it. The cable it comes with is long enough for the controller to be placed anywhere in the car. I have the same unit in my Celsior and its great. Price is $600 as what i paid for it in Japan with delivery to Australia

I have for sale a soarer aircon compressor from a 4.0 V8 that I bought from a wrecker to fit to my celsior but it wont fit so I had to get my celsior one rebuilt. Looking for $350 In Melbourne but can post interstate.

U need to find a place on the net to store the pics and then just use the insert image icon to insert the link to the place you stored the pictures.

Pics

Hankook silica K104 18” tyres 2 – 235x40x18 2 – 265x35x18 All 4 with 80% thread left. Selling as upgrading to semi comp tyres. Located in Melbourne but can courier interstate $650 ONO Email me at redlem@bigpond.net.au if interested

Brand New Made from fibre glass. with a grey cover and an MDF base which bolts to the car. They are approximately 10 cm deep at their highest point and about 3 at their lowest. Angled towards the middle of the car so the sound is directed at you. Designed for 6.5" Mid and space for a tweeter to be mounted also. $90 Email me at redlem@bigpond.net.au if interested

Autogauge 2 Inch Electric Oil Temp Gauge Smoke series (Like defi) 270 degree display Comes with oil temp sensor Brand new still in unopened box $50 Autogauge 2 Inch Mounting Cup Brand new still in unopened box $30

Will post pics of it when the air sus controller arrives. Its still sitting in Jap Land

Got some new 19's last week and have the answer. The offset u need depends alot of the width of the rim you are using. The rims I got were 8.5' with 38 offset for the front and 9.5' with 45 offset for the back and the rims sit perfectly with the guards. I got 235x35 tyres up front and 265x30 tyres up the back and it looks phat with that combo.

Item: 4 x original rims and tyres off my Toyota Celsior/Lexus LS400 Rims are 15x7.5 inch with 38 offset 5x114.3 PCD Tyres are Bridgestone 215x65x15 with 80% thread left. Picture http://www.skylinesaustralia.com/forums/in...e=post&id=22423 Location: Melbourne Item Condition: Used Reason for Selling: Got new rims Price and Payment Conditions: $300 ONO Extra Info: - Contact Details: email me at redlem@bigpond.net.au or PM me

I found some fabulous 20 inch deep dish rims which are +45 offset for sale at a good price. Question is will this +45 offset cause to the rims to sit 2 far into the guards as the recommended offset is +40 right???

I will have the one out of my Celsior for sale very soon with the 6 disc stacker as its all being replaced with new items.

Will the soarer V8 ac compressor fit? Its only a matter of changing the backing plate isent it?

I am after a replacement A/C compressor for my 4.0 V8 (same as soarer V8) How much do these go for roughly?

someone told me its just plug and play into the suspension ecu. Does anyone know if any mods are required to the wheel arches or anything else to fit 19 or 20 inch rims and tyres?

Hey people I just sold my 4x4 and got a 1990 celsior as my daily driver. Where and how much is 1 of those airbag height controller? How hard is it to install?