Jump to content

My Is200 Drift Car Build

PEWPEW
 Share

Recommended Posts

PEWPEW Progressing

PEWPEW

Posted
Posted

Hello all!

I am building a IS200 drift machine. Bought it as a fire damaged write off (someone may know the previous owner).

Planning on running 2JZ-GTE, 6 point cage, C-west style kit, coilies, etc

I've attached some photos of where I'm up to. Basically ready to get the cage put in.

So far I've replaced the front suspension, brake and clutch master, have front and rear windscreen, replaced passenger door and front left fender.

Gutted the interior, stripping out the sound deadening and general cleaning.

Used to own a R31 skyline with PEWPEW number plates, so this one is called PEWPEW 2.0

Really feels good to have a project car again. Undecided if I will keep it black or paint it white.

post-6554-0-73329600-1357790827_thumb.jp

post-6554-0-02486200-1357790857_thumb.jp

post-6554-0-47860400-1357790890_thumb.jp

post-6554-0-25192100-1357790918_thumb.jp

post-6554-0-50869700-1357790949_thumb.jp

post-6554-0-60536300-1357790972_thumb.jp

post-6554-0-19947000-1357791004_thumb.jp

post-6554-0-66239200-1357791064_thumb.jp

post-6554-0-06589600-1357791104_thumb.jp

post-6554-0-99786400-1357791130_thumb.jp

Steve Grand Master

Steve

Posted
Posted

looking good mate, thanks for sharing.

Any chance you could keep this thread updated with your project photos.. would be good to follow :)

PEWPEW Progressing

PEWPEW

Posted
  • Author
Posted

looking good mate, thanks for sharing.

Any chance you could keep this thread updated with your project photos.. would be good to follow :)

Yes sir, will do.

  • 1 month later...
  • 1 month later...
PEWPEW Progressing

PEWPEW

Posted
  • Author
Posted

Well hello again every people!

Been a while, so here's an update. Looking a little different from when I got it.

Got some Driftworks coilovers in, a lick of paint. Waiting for monies to come in to get the cage done, then on to everything else.

Decided to go 1JZ-GTE due to lack of funds :'(

So still lots of things to do!

post-6554-0-62576900-1366263672_thumb.jp

post-6554-0-18837400-1366263706_thumb.jp

Meighen Progressing

Meighen

Posted
Posted

Nice work, looking good. Are you not doing anything else before getting the cage in then?

PEWPEW Progressing

PEWPEW

Posted
  • Author
Posted

Nice work, looking good. Are you not doing anything else before getting the cage in then?

Yes I have some small things to do. The major work is of course the most expensive.

I really want to get the cage done as the car wont be moved much after.

  • 2 months later...
PEWPEW Progressing

PEWPEW

Posted
  • Author
Posted

Well been a while since my last post. So here are some updates.

Installed Driftworks coilovers, did some painting and a small amount of wiring for the lights.

1JZ-GTE non VVTi acquired. Gearbox, front sump and various other bits sourced. Nearly enough cash saved for roll cage. Making dash switch panel. Modifying steering column for quick release. Lots more welding to do.

It's been very difficult with the rain as I have no shelter and only a small shed to work in. Persistance and patience are key I guess.

Really hope to have it running in the next few months before I go up north.

Here are some pictures for those hungry eyes.

post-6554-0-98739600-1372389638_thumb.jp

post-6554-0-09606000-1372389723_thumb.jp

  • 3 weeks later...
PEWPEW Progressing

PEWPEW

Posted
  • Author
Posted

Wow, what a weekend. Got the engine in and lots of things line up perfectly, some not so.

There is a lot of satisfaction finally getting things done after waiting so long for parts.

Here are some pictures so far.

post-6554-0-53972200-1373858244_thumb.jp

post-6554-0-26614300-1373858252_thumb.jp

post-6554-0-46071700-1373858259_thumb.jp

post-6554-0-31196900-1373858265_thumb.jp

post-6554-0-43231100-1373858272_thumb.jp

  • 4 weeks later...
PEWPEW Progressing

PEWPEW

Posted
  • Author
Posted

Okey dokey, update time!

Car went off to get the roll cage done. Having solid engine mounts made while it's there. Sparco Sprint V seat, hydraulic clutch throw out, 3 core rad, 600x300x100mm intercooler, Takata 5 point harness, new fuel feed and brake hoses, managed to source a good bonnet, 30mm spacers all round with 17" Lexus rims.

To be done once back from cage work: fit windscreen, wiring (eeek), plumbing, more painting (paint fixing) lock spacers.

Anyways, here are some more photos.

post-6554-0-18371900-1376449244_thumb.jp

post-6554-0-62486800-1376449263_thumb.jp

  • 5 weeks later...
PEWPEW Progressing

PEWPEW

Posted
  • Author
Posted

Car came back from getting cage done. I've been adding bits slowly, slowly.

post-6554-0-92514500-1378958595_thumb.jp

post-6554-0-60758700-1378958611_thumb.jp

post-6554-0-32617800-1378958628_thumb.jp

post-6554-0-04262000-1378958640_thumb.jp

  • 2 weeks later...
PEWPEW Progressing

PEWPEW

Posted
  • Author
Posted

Ok another update. While the car was getting the cage done I had some solid mounts made.

Today I started on wiring but got stuck as I've misplaced a fuse panel. I hooked up all the intercooler piping save for one reducer bend.

post-6554-0-11288700-1379837348_thumb.jp

post-6554-0-07487200-1379837377_thumb.jp

  • 3 weeks later...
PEWPEW Progressing

PEWPEW

Posted
  • Author
Posted

Well the good news is it's running, bad news is the valve stems are leaking :( still waiting on the prop shaft shaft

  • 1 year later...
PEWPEW Progressing

PEWPEW

Posted
  • Author
Posted

Was the engine conversion much of a drama??

Not much for me as it is solid mounted. Engine fitting is usually not a drama, wiring is a different matter.

PEWPEW Progressing

PEWPEW

Posted
  • Author
Posted

Well time for an update seeing as it's been so long.

It's is 99% complete! Just a steering and suspension alignment to do. Then i need to fix my trailer and tow car.

Oh and also a respray, going a different colour.

For more updates and a video of it running you can go to Farcebook http://www.facebook.com/rhyspewpew

PEWPEW Progressing

PEWPEW

Posted
  • Author
Posted

Ok so here are some videos for ya.

And some pictures:

post-6554-0-41577500-1426661746_thumb.jp

post-6554-0-91554500-1426661759_thumb.jp

post-6554-0-25740400-1426661775_thumb.jp

post-6554-0-69943400-1426661791_thumb.jp

post-6554-0-09469000-1426661803_thumb.jp

Still a work in progress as any car is.
Simply can't wait to fry some tyres!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing



  • Join The Club

    Lexus Owners' Club Australia is an Independent Lexus Owners Club.
    Join our Australian LOC community. It's FREE!

  • Latest Member Posts

    1. 0

      Video: Lexus Driving 🤍 #cpm #gaming #gamers #australia #automobile

      Lexus Owners Club in Various Lexus Videos
    2. 0

      LS460 Folding Mirror Doesn't Stop.

      Hi. The driver's mirror on my RHD LS460 folds in and out okay, but when folding in, it gets to the stop position but keeps trying to go further, so it continuously clicks. Is this repairable, or will the mirror have to be replaced? Has anybody fixed this problem? If so, how? Cheers.
      Mile_High_Flyer in Lexus LS400 / Lexus LS430 / LS460 / LS600 / Toyota Celsior Club
    3. 0

      Video: Cleaning the Ice of a Lexus from Sydney that's never seen snow

      Lexus Owners Club in Various Lexus Videos
    4. 0

      Carplay issues with iPhone IOS 18.1 making & receiving calls

      Just wondering if anyone else has recently encountered the following issue: I have two phones now running with IOS 18.1, an iPhone SE and iPhone 16 and they both are having the same problem, i.e. when making a phone call, the party I'm calling can just barely make out what it is I'm saying. I first encountered the problem with my iPhone 16 and at first thought it was the cable connecting to the USB-C on the phone. I went out and purchased a wireless CarPlay adapter which circumvented the problem. However today I needed to connect the iPhone SE and it too got the same problem in that when making a phone call, the person I'm calling can just barely make out what it is I'm saying. Checking sites in the USA it appears to be a common problem. UPDATE: The problem did not exist using IOS versions prior to IOS 18
      cssaus in Lexus NX Club
    5. 10

      Driving Light

      Hi Peter, After taking onboard your suggestions and a few good nights sleep to mull over options the new driving lights are installed and working. No holes were drilled into vehicle but I did cut a small slot into back of the larger plastic fuse box cover/lid to source power from jump start terminal. (12v battery is in boot of NX 450h+) The wiring was a little fiddly but not having to take the dash apart was a huge bonus to installing the XBB kit. Was able to ‘reuse’ relay base from wiring harness supplied with Ultra Vision lights. Fitted a 20 amp inline fuse as lights draw 13.2 amps total. Smart button works a treat so can have high beam on without driving lights. So glad that I found this forum when I did, Neil
      Malua in Lexus NX Club
×
×
  • Create New...




Forums

News

Membership