Need help plugging in my is200

[moonlight is200]

This is my gxe10r is200 and I recently got my motor back from the shop after it was rebuilt now stupid me forgot to take pictures of the loom and all the ground cables etc. Kinda did it in a rush and it's been a while since I have worked on it here are some pictures of the main things I'm struggling with. The first picture is the ground cable to I'm assuming the bell housing but where exactly is the question. I know grounds go to chassis from block, bellhousing and head but just the points is the question. Any help would be appreciated

[ilv1004s]

1st is earth but shouldbnt be there thats where the clutch line bolts up using a 10m bolt

3 is earth

2 i think is oil temp sensor should be a similar colour sensor on the side of the block next to the knock sensor

Edited October 4, 2021 by ilv1004s

[moonlight is200]

13 hours ago, ilv1004s said:

1st is earth but shouldbnt be there thats where the clutch line bolts up using a 10m bolt

3 is earth

2 i think is oil temp sensor should be a similar colour sensor on the side of the block next to the knock sensor

The earth on the transmission has been moved to the bell housing 

Still looking for a point on the block to put the earth to haha 

And I'll have a look about the sensor.

Appreciate the response, still pretty new to is's so we will see how it goes