wato Posted February 26 Share Posted February 26 Hello all. I have a ding on the boot of my 2007 is250. Easiest solution is to get a good second hand one. But I have to disconnect the wiring coming into the boot lid via the left hand boot hinge and it appears there isn't anywhere visible where to disconnect the wiring. Ive removed the boot lid cover so this is how I know. So im guessing its somewhere hidden behind the cover under which is covering the rear shelf. Can anyone shed any light before I attack the remains cover? Id rather find the connectors than start cutting and splicing. Thank you very much! Quote Link to comment Share on other sites More sharing options...
wato Posted February 26 Author Share Posted February 26 After looking at the wiring again under the boot lid cover, I realise I don't need to do what I thought. I can just disconnect the wiring of various items like tail light etc, camera, rego plates light and all that, at their source. should have thought that before. Anyhow thanks anyway and have a good afternoon/night Quote Link to comment Share on other sites More sharing options...
ilv1004s Posted February 27 Share Posted February 27 yeap just disconnect and reassemble no new one and plug/clip them back in Quote Link to comment Share on other sites More sharing options...
wato Posted March 7 Author Share Posted March 7 So all went smoothly with the replacement boot lid, if anyone needs to do it the one thing you have to swap over apart from the wiring is the latch and key assembly, simple job with four nuts to remove the two assemblies, otherwise you wont be able to open the boot if the electrics or battery fails. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.