frylai Posted December 26, 2003 Share Posted December 26, 2003 Hi All, I know 4ROLLN is running on Cusco Struct, and kind of struct and shift knobs are you guys running on? pics and comments would be nice... Matt :) Quote Link to comment Share on other sites More sharing options...
Gavin_S Posted December 26, 2003 Share Posted December 26, 2003 I'll run a TRD of each if you wanna bring 'em back with ya matt!!! Quote Link to comment Share on other sites More sharing options...
frylai Posted December 26, 2003 Author Share Posted December 26, 2003 I'll run a TRD of each if you wanna bring 'em back with ya matt!!! TRD? they only make one for the auto, I wanted a Toms but it dosent fit..you want me to get you a price? Matt :) Quote Link to comment Share on other sites More sharing options...
frylai Posted December 26, 2003 Author Share Posted December 26, 2003 I'll run a TRD of each if you wanna bring 'em back with ya matt!!! TRD? they only make one for the auto, I wanted a Toms but it dosent fit..you want me to get you a price? Matt :) TRD Shift Kits and Knobs Is it the one with the pic by the Shift Knobs? that one is 8200 Yen, divide that by 65 and that the price I should be able to get it for... Matt :) Quote Link to comment Share on other sites More sharing options...
2JZ-GTE-IS200 Posted December 26, 2003 Share Posted December 26, 2003 ive got a toms shift knob in my is2 as for strut braces, ive got cusco rear and PLP front on the Monster and cusco front and rear on the race car, but i also have Toms chassis braces on the Monster and TRD sway bars with HKS hipermax II dampers, and on the race car TTE dampers and TTE sway bars....with TOMS chassis braces i know you only asked about knobs and braces.... <_< Quote Link to comment Share on other sites More sharing options...
Gavin_S Posted December 27, 2003 Share Posted December 27, 2003 Price on a TRD shift knob(auto)....yes please Matt! ps-you rock. :D Quote Link to comment Share on other sites More sharing options...
frylai Posted December 27, 2003 Author Share Posted December 27, 2003 Price on a TRD shift knob(auto)....yes please Matt!ps-you rock. :D I already told you gav... 8200 Yen Divide it by 65 = $126.15 NZD :D Matt :) Quote Link to comment Share on other sites More sharing options...
frylai Posted December 27, 2003 Author Share Posted December 27, 2003 (edited) ive got a toms shift knob in my is2as for strut braces, ive got cusco rear and PLP front on the Monster and cusco front and rear on the race car, but i also have Toms chassis braces on the Monster and TRD sway bars with HKS hipermax II dampers, and on the race car TTE dampers and TTE sway bars....with TOMS chassis braces i know you only asked about knobs and braces.... <_< Gav, The TRD shift knob is made out of Leather...I can get it for around the Jap price, use it only for refrenece, might be abit more sometimes...:( Mat C, I m thinking of getting a struct, I did some research today and I heard only the PLP fits with engine cover...:( JIC does sometimes and dosent sometimes...but I m not going to pay $340 USD + ship for a damn struct bar, I rather spend that money on sways. Some TRD sways would be nice. What difference can you feel inbetween the PLP and Cusco, I know the Cusco would'nt fit with engine cover. Matt :) PS - PLP for my shift Knob...:) Edited December 27, 2003 by LsportlineIS300 Quote Link to comment Share on other sites More sharing options...
4ROLLN Posted December 28, 2003 Share Posted December 28, 2003 Sorry about the crap photo but here's the Cusco Strut brace for my car, there are about three or four options avaliable with the top Cusco being a carbon fibre which is rather expensive and the next best one is this one: Note it will probably only fit over this engine!!!! It is one of the best in my opinion and I did notice a much better handling response which was both stiffer and had a better feel....................I really need to do the rear aswell at some stage as my king springs have made the rear a bit loose with occupants in the back when extreme cornering (which is obviously only attempted on private roads) :D Quote Link to comment Share on other sites More sharing options...
frylai Posted December 28, 2003 Author Share Posted December 28, 2003 Thanks Hayden for your pic...I need something that fits onto the IS300...from what I found out only JIC, PLP will fit with engine cover...but PLP is far too ecpensive, I think I will get something else at the mean time..also i m getting a new grille from the US. Matt :) PS - Hayden you still want a Oil filler cap? Quote Link to comment Share on other sites More sharing options...
4ROLLN Posted December 28, 2003 Share Posted December 28, 2003 your only other option is to remove the engine cover which isnt tidy, but depends on your choice i spose. you have PM! Quote Link to comment Share on other sites More sharing options...
2JZ-GTE-IS200 Posted December 28, 2003 Share Posted December 28, 2003 yep the PLP is the only one that will fit the is300 with no problems...ive heard mixed reports about JIC products, most of them negative as for the differences in feeling.. well ive not driven The Monster with the PLP brace yet, as we are still doing the electrics, i did drive it as an is200 with the cusco and it was fantastic.....as the monster now has a supra engine, it would be unfair of me to even try and compare, as 1. i wouldnt drive it without a front brace,and 2. it wont have been driven with the cusco fitted with the supra engine fitted...plus with over 650bhp...the feeling of the brace will be the last thoughts on my mind Quote Link to comment Share on other sites More sharing options...
frylai Posted December 29, 2003 Author Share Posted December 29, 2003 yep the PLP is the only one that will fit the is300 with no problems...ive heard mixed reports about JIC products, most of them negativeas for the differences in feeling.. well ive not driven The Monster with the PLP brace yet, as we are still doing the electrics, i did drive it as an is200 with the cusco and it was fantastic.....as the monster now has a supra engine, it would be unfair of me to even try and compare, as 1. i wouldnt drive it without a front brace,and 2. it wont have been driven with the cusco fitted with the supra engine fitted...plus with over 650bhp...the feeling of the brace will be the last thoughts on my mind The PLP bar is $340 USD + Shipping, for the same price I can get some Hotchkis Sways, or TRD... Matt :) Quote Link to comment Share on other sites More sharing options...
2JZ-GTE-IS200 Posted December 29, 2003 Share Posted December 29, 2003 id say go for the sways first anyway.... i will be engineering my own brace soon, which will clear the is300 engine ...... <_< Quote Link to comment Share on other sites More sharing options...
?UESTLOVE Posted December 29, 2003 Share Posted December 29, 2003 I have the TRUST Grex knob, and a rear strut brace I bought from America on Ebay for $29 US :D Looks identical to a CUSCO. Quote Link to comment Share on other sites More sharing options...
frylai Posted December 30, 2003 Author Share Posted December 30, 2003 id say go for the sways first anyway....i will be engineering my own brace soon, which will clear the is300 engine ...... <_< ummm....guess who is interested :D Shane, whoa $29 how can It be so god man cheap? Matt :) Quote Link to comment Share on other sites More sharing options...
frylai Posted December 30, 2003 Author Share Posted December 30, 2003 Shane your JIC bar will be ready next week...Gavin your TRD knob will be shipped tomorrow, I think I will get a CF JIC bar myself... Matt :) Quote Link to comment Share on other sites More sharing options...
Hoon Posted December 30, 2003 Share Posted December 30, 2003 I have the TRUST Grex knob, and a rear strut brace I bought from America on Ebay for $29 US :D Looks identical to a CUSCO. I have just ordered a RVM rear strut brace from ebay for $33 +shipping. from the picture I saw it looks like decent quality workmanship, for a realistic price. I guess I will see when I get it. There are heaps of them advertised on the site. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.