stephenc

They use to sell the tint sprays at auto stores such as Repco. I used this many years back on my other car for parking lamps and indicators....ended up going back to clear parking lamps ;) Tip: You need to spray the tint on VERY evenly. When the lamps are off, it looks fine....but once lit, if it's not even, you will see light and dark patches. For the rear lamps, I took to a panel shop to spray properly. Many years later, still looks fine. Was just basically thinner with a touch of black.

:D :D :D

Unfortunately, last minute change of plans...so was unable to attend. Was told that there was a long queue coming up Marsden Rd this morning....mostly P platers in modified cars :D Would have been a nice sight!

Buy 12, got 12 free. Too many now Yet another exhaust scratch. This time from Penrith!

If you're referring to the Modellista headlamps.....looks different...but does not suit the Lexus ;)

Could this be a PUR-08K plated IS?

The "stall" level can be increased for performance improvements....common in drag race applications.

If you have an auto, then you would have a torque converter. The input shaft drives the output shaft via transmission fluid. When the torque convertor "locks" up then input and output shafts are locked, rather then driven by fluid. Hope that makes sense....correct me if I'm wrong also :D

Are these any different from the oem lexus ones?? Yes, JDM ones have special Sushi compartments :D And a place to mix wasabi

Mark, this may be of interest to you Body Kits

For those that are interested: Australian Body Kits

Are you sure it's a 6310? :o :D

Mark, you will need a can of caliper paint to do a proper job (a few coatings). You won't get far with someone's left-overs.

Is the air filter clean?

They leave a bag of Lexus chocolates on the front passenger seat after each service.

Many companies are selling electric superchargers...why not build your own :D :D Electric SC

Credit card

Main difference is in the length. Aust = Long, JDM = Short

Sydney City gave me an ES300 also. Did you have fun raising and lowering the rear electric blind? :P

After some research, I decided on the Trust Power Extreme II. Not too loud, nice sound....and performance improvement. Yes, it does sit a touch low ;)

The standard headlamps will give it away.....200 - orange reflector & 300 - clear.

Anyone used a Navman ICN? Interested in your feeback on the product. Thanks.

If you coat all wheels, then it should be fine even if the finish is not a 100% match to the IS300. The problem is when you repair one wheel, as the finish may not match the other wheels.

Close the sunroof :D

That's right! Luckily Lexus replaced all of mine as THEY scuffed them (including the spare!) during a service :o The wheels on mine are the same as the IS300s and the finish is apparently difficult to match if repaired.