I CU2 Posted August 19, 2013 Share Posted August 19, 2013 Hi guys,Does anyone know how to adjust and save how much the side mirror tilts when you go into reverse? Mine only tilts slightly and I can't see the curb, only the side of my door and have to manually press the button to make it tilt. I've read the manual and it doesn't say anything either? Quote Link to comment Share on other sites More sharing options...
Subby Posted August 21, 2013 Share Posted August 21, 2013 Have the same problem on the same model car, I CU2 - will get it checked on Friday during its 36 month dealer service and get back to you. Quote Link to comment Share on other sites More sharing options...
FrankyX Posted August 21, 2013 Share Posted August 21, 2013 Going off the 3IS set up (not sure if same for 2IS), you need to set the mirror while in reverse to where you want it to tilt to. Then you will need to save this to your seat position memory. Quote Link to comment Share on other sites More sharing options...
kyo Posted August 21, 2013 Share Posted August 21, 2013 Does the 2IS even has this feature? Quote Link to comment Share on other sites More sharing options...
Subby Posted August 21, 2013 Share Posted August 21, 2013 Thanks for the suggestion, FrankyX - will give it a go. And kyo, yes, the 2IS Sports Luxury has this feature - not sure about Prestige or Sports models. Quote Link to comment Share on other sites More sharing options...
I CU2 Posted August 21, 2013 Author Share Posted August 21, 2013 Thanks Subby, I read that it might be a warranty issue. I tried that method Franky, it just gave me a long beep :( and I think tilting mirrors are only equipped on models with memory seating. Actually, I noticed on my drivers side when it tilts in reverse I can see the curb but on my old car the angle was tilted so that I could see the line markings in car parks (to see if I parked within the lines - horrible parker here) and a clear shot of the curb vs door + curb. So it might be normal for the 2IS? I'll be awaiting your reply Subby :) Quote Link to comment Share on other sites More sharing options...
Subby Posted August 22, 2013 Share Posted August 22, 2013 PPLs, Found these instructions on another forum: "Alright here u go folks ..U start the enginePut it on reverseSelect from ur door panels the side mirror u wanna adjustMove the side mirror to the point u want using the arrowsAnd thats itWhen u put it into drive. The mirror will go back to the original setupAnd when u put it on reverse ur mirrors will till" Hope to try it out later today - Nope - didn't work ! Will get the dealer to fix it tomorrow - I hope!! Quote Link to comment Share on other sites More sharing options...
sliq Posted August 23, 2013 Share Posted August 23, 2013 thanks for the tip. i was wondering mine didn't have it, and it's because it's a prestige :( needless to say, my brother's accord euro has it and it's a VERY handy feature! Quote Link to comment Share on other sites More sharing options...
Subby Posted August 23, 2013 Share Posted August 23, 2013 Update after dealer service: Sadly the angle cannot be adjusted!! :( It does seem to move down a certain amount further from the normal setting, so I re-adjusted the normal setting just a bit lower than before and the reversing result is satisfactory now. Quote Link to comment Share on other sites More sharing options...
I CU2 Posted September 2, 2013 Author Share Posted September 2, 2013 Thanks subby! Tried it and it works :) Shame that there's no way to save the memory. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.