jesseshi Posted January 9, 2015 Share Posted January 9, 2015 Hi guys Im planning to get a blackvue dr650 and hardwire it using a power magic pro. Has anyone installed something similar and tell me if I can install the power magic pro in the glovebox of a 2006 is250. Im looking for a hidden install. Quote Link to comment Share on other sites More sharing options...
RotorRian Posted January 15, 2015 Share Posted January 15, 2015 you sure you don't want a FineVu CR500. I have a brand new one in Sydney I'd be happy to do a mean deal on. I can supply the hardwire kit too. Quote Link to comment Share on other sites More sharing options...
blaze Posted February 28, 2015 Share Posted February 28, 2015 I installed a Blackvue DR650 in IS300 3 wires if you get the power box. On the JCE10 I used add-a-circuits from Navara (Autobarn) Just get yourself a test light and look for constant and acc power and your set. Here's footage of how the front looks like. It needs a polarizing filter otherwise you get dash reflections Quote Link to comment Share on other sites More sharing options...
Cookster670 Posted March 31, 2015 Share Posted March 31, 2015 I had mine installed under the center console wired to the cigarette lighter. (didn't do it myself). It's neat and completely hidden. Quote Link to comment Share on other sites More sharing options...
SDGFJI Posted April 4, 2015 Share Posted April 4, 2015 I had mine installed under the center console wired to the cigarette lighter. (didn't do it myself). It's neat and completely hidden. could you please message me where you purchased and installer details. i'm after the same thing Quote Link to comment Share on other sites More sharing options...
LEX51S Posted April 18, 2015 Share Posted April 18, 2015 you sure you don't want a FineVu CR500. I have a brand new one in Sydney I'd be happy to do a mean deal on. I can supply the hardwire kit too. RotorRian. Do you still have a deal on this dash cam? Quote Link to comment Share on other sites More sharing options...
RotorRian Posted April 19, 2015 Share Posted April 19, 2015 you sure you don't want a FineVu CR500. I have a brand new one in Sydney I'd be happy to do a mean deal on. I can supply the hardwire kit too. RotorRian. Do you still have a deal on this dash cam? Hi Chris, Yes, I can still do you a deal on the CR500HD Drop me a PM and I'll see what I can do on the pricing for you. You want just the CR500? Or you need any accessories as well? Quote Link to comment Share on other sites More sharing options...
Motivetronics Posted July 4, 2015 Share Posted July 4, 2015 You can find IGN, 12V Constant and Ground in the overhead console connector. I wired my own low voltage disconnect up there. This will save you running the wires down the pillar of the car. Quote Link to comment Share on other sites More sharing options...
Zerone Posted July 15, 2015 Share Posted July 15, 2015 Hi rakddon, That is correct, however it may be easier to wire directly to the overhead console / dome lamp, like motivetronics has suggested, Than running a wire down the front pillar trim (Airbags fitted), which the trim cannot be easily removed. (Not without cutting and replacing a clip). Constant power, ignition and ground are all available on one big @$$ plug. Plus this method makes it easy peasy to get the wire down through the headlining trim to the camera itself. Wire colours you will need to use are Light blue (Pin 5) battery power White with black stripe (Pin 1) Ground Green (Pin 27) Ignition Power (optional, use only if you want the cam powered up with the ignition on) I hope this helps Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.