teddypass Posted January 4, 2007 Share Posted January 4, 2007 hi, does any one install the HID KID for the Is250 in sydney? can i ask for where did you do it, is there any garage good at it? also does any one see the angel eyes kid for the IS250, i just found a image on the internet, it looks great, but not sure about which garage is good at to do the installation http://www.umnitza.com/popup_image.php?pID=1123ℑ=0 Quote Link to comment Share on other sites More sharing options...
Brandon Posted December 2, 2008 Share Posted December 2, 2008 Hi teddypass, You can install the HID KIT yourself. It is pretty straight forward. I had removed my OEM low beam and swapping with Euroline Bulb. Still not happy with the colour so I am planning to the HID kit and install it myself. Here is the link that show you how to install Low Beam H11 type. Let me know if you having trouble getting into the Bulb section. http://my.is/forums/f64/how-install-hid-ki...o-isx50-340763/ cheers, Brandon Quote Link to comment Share on other sites More sharing options...
ilv1004s Posted December 2, 2008 Share Posted December 2, 2008 bit of muck around invovled.. if your keen and dont know me and cevu can show u how to do it.. i did my HID's myself Quote Link to comment Share on other sites More sharing options...
cevu Posted December 2, 2008 Share Posted December 2, 2008 bit of muck around invovled..if your keen and dont know me and cevu can show u how to do it.. i did my HID's myself yeah.... pretty straight forward. complicated part is getting access and fitting it all in. very tight around the back of the headlights. but otherwise very simple! u can always wait for the next meet and there would be plenty of ppl who would be willing to show u! Quote Link to comment Share on other sites More sharing options...
Brandon Posted December 3, 2008 Share Posted December 3, 2008 Cevu, Do you have a pic to show where you place the Ballast for the Low Beam? Which HID Kit did you get? I am thinking of getting from XenonDepot.com but the bloody shipping is a bit pricy.... Want to get from ebay but afraid that Ballast might failed after a few months. cheers, Brandon Quote Link to comment Share on other sites More sharing options...
ilv1004s Posted December 3, 2008 Share Posted December 3, 2008 my kit cost me 80 bucks. and it's still going strong since march.. Quote Link to comment Share on other sites More sharing options...
Brandon Posted December 4, 2008 Share Posted December 4, 2008 my kit cost me 80 bucks.and it's still going strong since march.. What type of kit/brand? Did you get from ebay? Quote Link to comment Share on other sites More sharing options...
ilv1004s Posted December 4, 2008 Share Posted December 4, 2008 yeah mine was a ebay special... it was GT HID kit Quote Link to comment Share on other sites More sharing options...
cevu Posted December 5, 2008 Share Posted December 5, 2008 Cevu,Do you have a pic to show where you place the Ballast for the Low Beam? Which HID Kit did you get? I am thinking of getting from XenonDepot.com but the bloody shipping is a bit pricy.... Want to get from ebay but afraid that Ballast might failed after a few months. cheers, Brandon my ballast is just sitting behind the headlight and zip tied some other wires around there. been there since 2006 and hasn't missed a beat. mines just some generic cheapy off ebay! Quote Link to comment Share on other sites More sharing options...
Brandon Posted December 7, 2008 Share Posted December 7, 2008 Cevu, did u had to drill a hole in the dust cap for wiring hardness for the low beam? I've seen alot of people had drilled the hole. Quote Link to comment Share on other sites More sharing options...
cevu Posted December 8, 2008 Share Posted December 8, 2008 Cevu, did u had to drill a hole in the dust cap for wiring hardness for the low beam? I've seen alot of people had drilled the hole. yeah, it's a 25mm hole and everyone who has HID installed has that. Quote Link to comment Share on other sites More sharing options...
FrankyX Posted December 8, 2008 Share Posted December 8, 2008 Has anyone got any pics or diagrams of what they did with the wiring? Do you need to buy any additional wiring or should it all be included in the kits? Looking at buying my new kit within the next few weeks and wanted to fit it out myself. Quote Link to comment Share on other sites More sharing options...
cevu Posted December 9, 2008 Share Posted December 9, 2008 Has anyone got any pics or diagrams of what they did with the wiring? Do you need to buy any additional wiring or should it all be included in the kits?Looking at buying my new kit within the next few weeks and wanted to fit it out myself. the kit should have everything u need except the drill bit for the 25mm hole. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.