ldc Posted March 18, 2008 Share Posted March 18, 2008 Does anyone know where to get touchup paint for the IS? I'd imagine the Dealers would have some but yeh, how much do they go for? There is a chip just under the fender that i need to touchup before too long. Quote Link to comment Share on other sites More sharing options...
Art_76 Posted March 18, 2008 Share Posted March 18, 2008 Does anyone know where to get touchup paint for the IS? I'd imagine the Dealers would have some but yeh, how much do they go for?There is a chip just under the fender that i need to touchup before too long. You should have got a little tin when you purchased your car. Quote Link to comment Share on other sites More sharing options...
Lexy07 Posted March 18, 2008 Share Posted March 18, 2008 My car came with a small tin in the glove box. But I am pretty sure places like super cheap auto, autobarn and auto one sell tins or touch up pens. Or you could call a smash repairer and ask how much for them to mix you a small tin. Good Luck Quote Link to comment Share on other sites More sharing options...
ldc Posted March 18, 2008 Author Share Posted March 18, 2008 I don't think they supply me with a sample. I suppose i have to go and get one somewhere. Quote Link to comment Share on other sites More sharing options...
Lexy07 Posted March 18, 2008 Share Posted March 18, 2008 If you bought your car new - I would go back to the dealer and ask - asking is free :-) Quote Link to comment Share on other sites More sharing options...
Bluey Posted March 18, 2008 Share Posted March 18, 2008 If you bought your car new - I would go back to the dealer and ask - asking is free :-) I agree, chat with the dealer, assuming you bought it new. Quote Link to comment Share on other sites More sharing options...
ldc Posted March 18, 2008 Author Share Posted March 18, 2008 Im taking it back for Seat squeeching tmr and will do :) Quote Link to comment Share on other sites More sharing options...
Lexy07 Posted March 27, 2008 Share Posted March 27, 2008 Any luck?? Quote Link to comment Share on other sites More sharing options...
ldc Posted March 27, 2008 Author Share Posted March 27, 2008 I havent had the chance to go to the dealers yet, have had two appointment cancellation due to work. I was thinking of going to Repco, do they have and sell oem paint? Quote Link to comment Share on other sites More sharing options...
ldc Posted April 14, 2008 Author Share Posted April 14, 2008 Went to dealers today and they gave me a can for free. Said i never gotten one one when first bought. Quote Link to comment Share on other sites More sharing options...
SmellyTofu Posted April 21, 2008 Share Posted April 21, 2008 Good stuff. Every Toyota and Lexus comes with a can of touch up paint. Quote Link to comment Share on other sites More sharing options...
ldc Posted April 22, 2008 Author Share Posted April 22, 2008 Becos it such a small area (2mm by 2mm), do i bother with any rust agent before applying? Quote Link to comment Share on other sites More sharing options...
SmellyTofu Posted April 22, 2008 Share Posted April 22, 2008 As long as it hasn't started rusting, you should be fine but do a google on what the best method to applying the touch up paint from a can is. I've never had much luck doing with with a paint brush... Quote Link to comment Share on other sites More sharing options...
Sapphire Cam Posted May 14, 2008 Share Posted May 14, 2008 Ive done some touch ups - some have worked out excellent - some still need some more cutting back. I use an ordinary cotton bud - dab onto the spot very delicately until the spot in question is slight raised above the surrounding duco. Then get a hair dryer on low heat and speed for about a few minutes, but not any longer. You dont want the paint to completely cure. Then half an hour later, I go over the spot with a light cutting agent and cut back the newly applied paint, until it matches the height of the surrounding original paint. As you are cutting new paint which is 'higher' than the surrounding duco, the cutting action (if applied correctly) will not interfere with the original duco. Yes this sounds a little risky, and of course its never going to be as good - but this method has worked very well for me on a couple of spots that Ive done. The trick is getting the paint level right and start to cut it back before it completely cures. On the other hand, if you have a good dealer, they may do it for you at your next service!! Quote Link to comment Share on other sites More sharing options...
ldc Posted May 14, 2008 Author Share Posted May 14, 2008 Thanks Saphhire, but i just dab it with the cotton bud and left it, was only wanting to cover the spot from being exposed and potentially get rusted. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.