plankton007

ISF models in the States didn't come with PCS standard and it was an option. They probably used a non pcs base. Still it appears that you need to remove PCS unit for the intake tubing to fit. No PCS on Audm cars shouldn't throw any errors but Cruise Control won't work and will show an error of you try.

Finally installed some sway bars Finished for now...

Had mine installed today. The steering wheel is where it should be at all times without surprising you by going off by itself like it did on standard bushings sometimes. I hardly feel any dead spots in the steering especially during initial turn ins and no brake deflections. 100% worth.

I got my 90k coming up as well and got mine from the states for around $100AUD I can't exactly find where I got them from but here are a few links http://www.ebay.com.au/itm/6-FK20HBR11-Genuine-Toyota-Lexus-Denso-Spark-Plugs-Suit-IS250-350-GS350-450h-/252561897696?hash=item3acddcb8e0:g:AWIAAOSw6wRXAa1H http://www.ebay.com.au/itm/New-Genuine-Toyota-Lexus-Spark-Plugs-6-Pcs-90919-01247-Denso-FK20HR11-3426-/232031729788?hash=item36062b387c:g:utcAAOSw1h5XQVMR http://www.ebay.com.au/itm/LEXUS-OEM-FACTORY-SPARK-PLUG-SET-2006-2015-IS350-/331424735498?hash=item4d2a74210a:g:D2MAAOSwwTlUmvw4 Edit: Bought mine from this guy http://www.ebay.com.au/itm/NEW-Genuine-Toyota-Lexus-Spark-Plugs-90919-01247-Denso-FK20HR11-set-of-6-3-5L-/281723994043?_trksid=p2141725.m3641.l6368

IS250 will fit. They are the same across the entire range. Only for Sports models though.

Would the $50 extra be worth for the v22? Prices probably dropped because v23 will most likely be out soon.

I believe 2016 maps are v22 http://www.navigationau.com/toyota-lexus-navigation-disks.html This cd used to be $395 before but it's $200 now. Not sure if the site is legit though but it's been around for a while.

To be honest the Lexus Navigation system and route guidance is quite horrible. Not sure the updated maps would solve much.

Yeah same here. I never even thought of that thanks for bringing that up.

I've got a few burnt copies of v20 if you need. Just pm me and I'll sort you out.

I quickly searched up the part number for this and it's 58192-5306. Searching this on eBay gave me these two http://www.ebay.com.au/itm/GENUINE-LEXUS-ALUMINUM-FOOTREST-OEM-58192-53061-/221607618427?hash=item3398d7e77b:g:8H0AAOSwNSxUyueu http://www.ebay.com.au/itm/LEXUS-OEM-FACTORY-ALUMINUM-SPORT-FOOT-REST-2006-2013-IS250-IS350-58192-53061-/252246264363?hash=item3abb0c8a2b:g:BcAAAOSwRLZT7kyZ

http://www.ebay.com.au/itm/LEXUS-06-13-IS350-IS250-SPORT-FOOTREST-STEP-83K-OEM-/121678056236?hash=item1c5493cb2c:g:xY0AAOSwstxVfecy This one's used but not too bad http://www.ebay.com.au/itm/NEW-SET-LEXUS-IS350-IS250-ISF-SPORT-BRAKE-PEDAL-FOOTREST-UPGRADE-OEM-2006-2013-/182274561655?hash=item2a70691677:g:ZpAAAOSwknJX0mLs This one's brand new but shipping kills it. You could probably get it shipped to a US address and use a forwarder. I've used ustooz.com and they're pretty good with their rates and service. The other option is to find a wrecker I guess. It's the same across the IS250 IS350 ISF so shouldn't be too hard to find.

The clips are built into the footrest itself. Instead of clips I guess it's better to say that they're square holes where the floor would hook onto. You wouldn't be able to replace the grooves but you COULD repair them. Another (better) alternative is to get a new footrest. I've attached a photo below but I'm not sure how much help it'll be.

It simply comes off with a little bit of force. It's held in by 2 clamp like clips.

The VLeds T10 flank bulbs at 5000k is what I have. I think I have a photo lying around somewhere but over the years they haven't decreased in intensity or colour. I also have 360 bulbs for courtesy and interior dome lights and festoons for rear and trunk. They are quite bright at night time but if you're not directly looking at them it's not too bad.

Getting mine installed today with my coils and a wheel alignment. Apparently a wheels alignment and toe adjustment is something that needs done as the bushings make obvious any previous imperfections the car might have had.

coconut2001 does. I've been in his car and I've heard his car quite a few times and it's got ALOT of drone. Not I'm sure the Varex model will reduce the drone significantly but I wasn't comfortable hardwiring stuff into my car, hence the Ark exhaust.

http://www.vleds.com/h11-ultra-lmz.html Anyone interested? I shop from vleds every now and then and their quality is top. I've got their T10s in my car for almost 3 years now. These are newly released at 4500 lumens as well. Maybe we could save on shipping or even open up a group up.

Since you're losing money either way you could try fit it on your car and always sell it off if it doesn't fit. Just depends on how much people are willing to pay for it. It's a gamble I guess.

I did a quick search and they have differrnt part numbers with 06-08 being 48811-53040 and 09+ being 48811-53080. I know some people on the forums managed to interchange then though but don't quote me on that. To be honest I don't know why it shouldn't fit when the design is the same. Perhaps maybe the bushing where it bolts onto the chassis?

Some final things before I take a break... And some sway bars later down the track

Purchase a digitizer and DIY, Should cost you around $200-$300 A secondhand Nav will most likely cost you around $500

You won't find anything that would change the power significantly. Only things are Intake, Headers, Exhaust and a tune (not released yet).

Deeper, less drone, less tin noise, and quieter.

It's very quiet for a full catback system and quite nice on open throttle. In terms of drone there's MINIMAL drone around 1.5k rpms and over. Anything under that it starts to drone a little. I'm quite sensitive to drone so my idea of drone might not be what others classify as drone.