plankton007 Posted August 27, 2016 Share Posted August 27, 2016 It's very quiet for a full catback system and quite nice on open throttle. In terms of drone there's MINIMAL drone around 1.5k rpms and over. Anything under that it starts to drone a little. I'm quite sensitive to drone so my idea of drone might not be what others classify as drone. Quote Link to comment Share on other sites More sharing options...
iinkz Posted August 27, 2016 Share Posted August 27, 2016 Thanks for your review. How does this compare to the q300 w/midpipe. Louder? Deeper note? Quote Link to comment Share on other sites More sharing options...
plankton007 Posted August 27, 2016 Share Posted August 27, 2016 Deeper, less drone, less tin noise, and quieter. Quote Link to comment Share on other sites More sharing options...
2bling Posted August 27, 2016 Share Posted August 27, 2016 On 11/20/2010 at 1:31 PM, LEX51S said: something different. silvered out the dumb black things next to fogs while i was at it had a go at the bottom grill Looks great. You need a silver number plate frame. Quote Link to comment Share on other sites More sharing options...
Vaku Posted August 29, 2016 Share Posted August 29, 2016 On 27/08/2016 at 1:52 AM, HARDN said: Really, i was gunna get contis to replace my bridgstones because the front end has no grip in the wet!? well im specifically talking the rears on an ISF and the PSS's are just damn good! so for the 350 you will be mint! Quote Link to comment Share on other sites More sharing options...
Vaku Posted August 29, 2016 Share Posted August 29, 2016 On 26/08/2016 at 7:24 PM, plankton007 said: sounds great! nice design also Quote Link to comment Share on other sites More sharing options...
plankton007 Posted September 6, 2016 Share Posted September 6, 2016 Some final things before I take a break... And some sway bars later down the track Quote Link to comment Share on other sites More sharing options...
plankton007 Posted October 8, 2016 Share Posted October 8, 2016 Finally installed some sway bars Finished for now... Quote Link to comment Share on other sites More sharing options...
plankton007 Posted March 7, 2017 Share Posted March 7, 2017 Got this mad ass OEM box that replaces the standard cigarette lighter and ash tray box. Finally a place to put the sunglasses and other things. Quote Link to comment Share on other sites More sharing options...
Vukie Posted March 8, 2017 Share Posted March 8, 2017 21 hours ago, plankton007 said: Got this mad ass OEM box that replaces the standard cigarette lighter and ash tray box. Finally a place to put the sunglasses and other things. Nice, where can i pick one up? Quote Link to comment Share on other sites More sharing options...
brownbear8907 Posted March 8, 2017 Share Posted March 8, 2017 Where did you purchase the box? Quote Link to comment Share on other sites More sharing options...
plankton007 Posted March 8, 2017 Share Posted March 8, 2017 You guys can either PM me or go through Lexmania. If there's enough interest I'll organise a group buy I got this directly from Toyota Quote Link to comment Share on other sites More sharing options...
plankton007 Posted March 8, 2017 Share Posted March 8, 2017 Got it in today. Threw an ISF Steering damper in as well. Quote Link to comment Share on other sites More sharing options...
frankii Posted April 29, 2017 Share Posted April 29, 2017 Airlift 3P + cheap ugly ass 18" dailies! Quote Link to comment Share on other sites More sharing options...
Filo Posted May 6, 2017 Share Posted May 6, 2017 Hi Frankii, where did you get the Airlift from? Quote Link to comment Share on other sites More sharing options...
Minormagic Posted June 18, 2017 Share Posted June 18, 2017 Hello Everyone I'm only new here and this is my first post I have just bought an IS350 f sport 2011 Model I will be doing a few modifications to my car, the main one being the removal of the ML sound system complete as I find it really inferior. The volume is terrible as is the base response. I have purchased the Scosche dash kit. I have also purchased a non nav dash wiring harness to convert the dash to non nav wiring so the dash kit can be fitted and the HVAC LCD screen works properly. I have already removed the front door speakers and fitted Focal 3 way flax speakers. I will also be fitting dynamat to stop any resonance in the doors. One small modification I have already done is that I have fitted BENDIX GCT front disc pads. I am pleased to report no significant loss in braking performance but significantly cleaner wheels. I have fitted 19 x 8.5 and 19 x 9.5 staggered wheels which are silver. I would get home from the car wash and no matter how hard I tried to not excessively use the brakers, the wheels always had a black tarnish. I'm pleased to report that problem is solved. The part number is DB2255GCT. Remember this part number only suits the f sport front calipers. Will keep you posted as I move forward with the stereo install Cheers Darren 1 Quote Link to comment Share on other sites More sharing options...
IS350 Posted October 8, 2018 Share Posted October 8, 2018 1 Quote Link to comment Share on other sites More sharing options...
pearlisf Posted December 15, 2019 Share Posted December 15, 2019 Just painted by ISF bake calipers in VHT Burnt Copper. It came out looking amazing. The colour has a nice metallic finish to it. 3 coats of VHT Burnt Copper Brembo decals 2 coats of VHT clear 6 hours later... 1 Quote Link to comment Share on other sites More sharing options...
AutoDetailZone Posted December 16, 2019 Share Posted December 16, 2019 6 hours ago, pearlisf said: Just painted by ISF bake calipers in VHT Burnt Copper. It came out looking amazing. The colour has a nice metallic finish to it. 3 coats of VHT Burnt Copper Brembo decals 2 coats of VHT clear 6 hours later... Great finish, they have come up nicely. I remember it wasn't all that long ago when there was only a few colours to choose from in most stores from the VHT line, good to see more options now. I wouldn't mind testing out their Black Pearl eventually. 1 Quote Link to comment Share on other sites More sharing options...
LTuned Posted December 19, 2019 Share Posted December 19, 2019 On 12/16/2019 at 9:11 AM, pearlisf said: Just painted by ISF bake calipers in VHT Burnt Copper. It came out looking amazing. The colour has a nice metallic finish to it. 3 coats of VHT Burnt Copper Brembo decals 2 coats of VHT clear 6 hours later... They look good & stand out more, are you going to do the rear calipers as well. Quote Link to comment Share on other sites More sharing options...
pearlisf Posted December 19, 2019 Share Posted December 19, 2019 4 minutes ago, LTuned said: They look good & stand out more, are you going do the rear calipers as well. Thank you. Yes, have done the rears also. Quote Link to comment Share on other sites More sharing options...
LTuned Posted December 19, 2019 Share Posted December 19, 2019 Excellent. 1 Quote Link to comment Share on other sites More sharing options...
pearlisf Posted December 22, 2019 Share Posted December 22, 2019 Installed a $30 eBay rear bumper diffuser. Came out looking pretty good. The diffuser comes with 7 fins and fits just fine as long as you remove the 2 plastic bits connected to the rear exhaust tips. I decided to just cut off one fin from each side of the diffuser and this way it fits without any bumper modifications. The screws supplied are pretty crap as you can see in the photo but I have since replaced them with a flat head screw from Bunnings, which now blends in. https://www.ebay.com.au/itm/7-Shark-Fin-Black-Universal-Lower-Rear-Bumper-Body-Spoiler-Decor-Wing-Diffuser/153086013921?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649 Quote Link to comment Share on other sites More sharing options...
RodL Posted February 3, 2020 Share Posted February 3, 2020 Anyone else got cheap, innovative mods like Pearlisf? Quote Link to comment Share on other sites More sharing options...
pearlisf Posted February 18, 2020 Share Posted February 18, 2020 Just installed a carbon fiber roof spoiler. The fitment and finish is perfect. The supplier even sent me photos of the product before shipping. Arrived from Taiwan to Brisbane in 2 days. https://www.ebay.com.au/itm/Carbon-Fiber-For-LEXUS-IS250-IS350-IS-2nd-4D-Saloon-OE-Roof-Spoiler-2006-2012/362480482201?hash=item5465853799:g:vioAAOSwfONb1mlJ Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.