Jump to content

Recommended Posts

Posted

What would be the best coilovers for the 2012/2013 is350f for everyday drive?

thanks

Posted

Every day probably BC V2 not V1.

v2 has a larger master cylinder giving better control and comfort over the v1

Posted

b58cab9f.jpg

That's my car with Road Magnets. They are cheap for what they are but if you have the extra cash, you are better off getting the BC's. The 2" drop isn't very much.

Posted

ok i want to spend around $3000 and hopefully thats installed. so im guessing they wouldnt be anymore then that??

thanks for the replies

Posted

BC Racing V2 coil overs can be picked up for $1300 + install (200 - 400) or do it your self

Posted

I can put a plus one vote to the BC Racing V2 coilovers they are great and surprisingly comfortable for coilovers

Posted

Spent 2 days of research and procrastinating on how to install then... got off my ass and installed my coi lovers... I shoudnt of have been a tight ass and gotten the BC Racing V2 instead of V1 but I am still happy with them. Much easier to install than just springs...

20130111_094400.jpg

Before - OEM Sports Suspension

20130111_112644.jpg

After - I havent adjusted the height as yet - going to let them settle for a week but already happy how they sit. Only adjusted the damper... the factory setting was just a bit too hard

20130113_140952.jpg20130113_141004.jpg

Front - It dropped another 1/2-1 cm after a drive

20130113_135440.jpg

Rear

20130113_135453.jpg

20130113_134706.jpg

OEM Sports Suspension - Front vs BC Racing V1

20130113_095515.jpg

Stock Rear OEM Sports Suspension VS BC Racing V1

20130113_125345.jpg

Posted

so bc v2 or kw v3? i want to make sure its done good thefirst time what do use reckon are bc v2s good enough?

Posted

bc's are good for

KWs are better @ 3K+

but bang for buck

BC u cant go wrong

i have a set for sale

if your after bc's

Posted

Aren't your BC's for an ISF Danny? Or are they interchangeable between ISF/350/250?

Posted

Oh I see. The BC's for the ISF just have different springs & are valved differently.

Posted

I've had my BC's in for 4 days now and love them.... I havent adjusted the height as yet as I want the springs to settle first but still playing with the dampers.... but I think I got them right now and will put all the boot panels back in this weekend....

The only thing I hate is Melbourne CBD carparks..... not friendly to lowered cars....

Posted

Hi Quockies,

May I know how much you paid for your BCs, where you got it from and how much it cost you to install them? Thanks!

Posted

Hi Quockies,

May I know how much you paid for your BCs, where you got it from and how much it cost you to install them? Thanks!

hey mate,

I paid $1150 for the BC Racing V1 but if I could do it again, I wouldnt be a tight ass and gone the V2 for $1300. Picked them up from https://www.justjap.com/ including delivery (courier).

It costed me 3-4 hours of my time to install (Socket set, breaker bar, impact wrench, jack stands & jack) them otherwise you can get them installed for about $200-$400 depending on where and who.

Posted

Anyone here got Megan EZ coilovers? Well priced & the spring rates seem nice & soft. Good reviews on ClubLexus.

Posted

Hi Quockies,

May I know how much you paid for your BCs, where you got it from and how much it cost you to install them? Thanks!

hey mate,

I paid $1150 for the BC Racing V1 but if I could do it again, I wouldnt be a tight ass and gone the V2 for $1300. Picked them up from https://www.justjap.com/ including delivery (courier).

It costed me 3-4 hours of my time to install (Socket set, breaker bar, impact wrench, jack stands & jack) them otherwise you can get them installed for about $200-$400 depending on where and who.

Thanks for your reply.

Would you know if the height for BR Type RS Series be adjusted higher than your current ride height? It looks too aggressive to me. Doesn't say on their site the height range. was hoping to lower my rear by approx 1.5" and front 1".

Posted

Thanks for your reply's looking at these or KW's, still doing my homework. Cheers.

Posted

Thanks for your reply.

Would you know if the height for BR Type RS Series be adjusted higher than your current ride height? It looks too aggressive to me. Doesn't say on their site the height range. was hoping to lower my rear by approx 1.5" and front 1".

Hey mate,

Yeah they can, I left my coils as they were shipped to me however I can wind them up a inch or lower them about another 3/4 inch. This would be the same with the BR Type as well

Cheers

Q

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now




  • Join The Club

    Lexus Owners' Club Australia is an Independent Lexus Owners Club.
    Join our Australian LOC community. It's FREE!

  • Latest Member Posts

    1. 0

      LS460 Folding Mirror Doesn't Stop.

    2. 0

      Carplay issues with iPhone IOS 18.1 making & receiving calls

    3. 10

      Driving Light

    4. 33

      LEXUS IS250 TOUCH SCREEN DOES NOT WORK - PLEASE HELP!!!

×
×
  • Create New...




Forums


News


Membership